Simulate a process

The simulation is disabled by default. If you wish to use it, please contact us through the SUPPORT in order to request it.

Iterop’s simulation tool allows you to test several instances of the same process in order to study the impacts and possible points of improvement before the final deployment of your process.

Thanks to the module, you will be able to test your process and in particular :

  • Check if your process has been well modeled
  • Study the distribution of the workload between the different actors in the process
  • Instantly identify critical points in your process
  • Compare reactions with different versions of the same process

Here is an overview of the results generated after the simulation of a process:

How do I access the Simulation module?

To access the Simulation tool :

  1. Go to the Iterop Design interface
  2. Click on the “Templates” tab in the left menu
  3. Select the process you wish to test, a window opens
  4. Click on Simulation
  5. Here is your configuration interface:

1️⃣ The flow chart of your process
2️⃣ The configuration area for your process tasks and gates
3️⃣ The quick setup button

Updated on 13 November 2020

Was this article helpful?

Related Articles